Texas State Flag: Lone Star Meaning, History & Exact Dimensions
Why Texas has one star, how its 1839 Republic flag became today’s state flag, and the exact measurements in Texas law.

What does the Texas state flag look like?
The flag is a horizontal 2:3 rectangle. A vertical dark-blue band fills one-third of its length on the hoist side, the side next to the pole. A centered white five-pointed star occupies the blue band. On the remaining two-thirds, the upper half is white and the lower half is red.
This arrangement is easier to recognize from a distance than a seal-based state flag. Its nickname, the Lone Star Flag, emphasizes the one large star instead of the number of stars found on the U.S. national flag. When illustrated horizontally, the star always has one point facing upward, the white horizontal field sits above red, and the blue vertical band is beside the hoist.
The design is defined in Texas Government Code §3100.002. It does not contain a coat of arms, an inscription or the outline of the state.
When was the Texas Lone Star flag adopted?
The Texas Congress approved the Lone Star Flag on January 25, 1839, during the years when Texas existed as an independent republic. It was approved by Republic President Mirabeau B. Lamar, after legislation introduced by Senator William H. Wharton had been revised in the legislative process.
A surviving original color drawing by Peter Krag was approved that day. The Texas State Library and Archives Commission preserves documentation of Krag’s design sketch and the signatures of Lamar and legislative officers. Krag is credited with creating the approved artwork, but historians caution that the identity of the person who first conceived the flag’s basic design is not firmly established.
Texas joined the United States in 1845 and continued using the distinctive Lone Star design as a state symbol. The flag’s legal history was complicated by revisions of nineteenth-century statutes; Texas later adopted fresh flag legislation, including its 1933 flag act and later codification. Today’s law explicitly identifies the flag as the 1839 national flag of the Republic of Texas, preserving that historic link.
What does the single white star mean?
Texas is nicknamed the Lone Star State, and its flag expresses the identity that developed during the struggle for independence from Mexico and the republic period. The one star evokes a separate Texas political identity and the unity of the state.
The law specifies the star’s number of points, size, position and orientation. It does not legally assign five separate virtues to each point. Some historic writers have proposed associations such as loyalty or prudence for the star’s points, but these should be described as later interpretations, not as wording of the current flag statute.
It is also incorrect to claim that Texas has always had exactly this flag. Earlier standards and national flags used different patterns, including the Republic’s earlier blue flag with a golden star. The popular modern image is the 1839 design, not every historic banner flown in Texas.
What do the red, white and blue colors mean?
Texas law explicitly defines the three symbolic meanings: red means bravery, white means purity, and blue means loyalty. Those meanings apply to the flag as a whole; they are not instructions to add additional symbols to the colored fields.
The law also prescribes the printing colors Pantone 193 for red and Pantone 281 for dark blue. White is uncolored or white fabric. For an approximate screen illustration, use a deep blue and bold red that resemble the official flag, but keep the legal printing references distinct from arbitrary web HEX codes.
Texas’s color meanings are unusually clear because they appear directly in the current Government Code. When comparing different state flags, do not automatically transfer these definitions to California, Minnesota or Colorado: each state has its own design sources and symbolism.
Texas flag dimensions: exact measurements
Under Government Code §3100.002, flag height : length = 2 : 3. The blue panel extends through the full height and fills one-third of the flag’s total length. The two remaining horizontal bands each fill one-half the height. The star’s imaginary outer circle has a diameter equal to three-fourths of the blue band width.
| Measurement | 900 × 600 pixel drawing | 18 × 12 cm drawing |
|---|---|---|
| Total length × height | 900 × 600 px | 18 × 12 cm |
| Blue vertical stripe | 300 px wide | 6 cm wide |
| Upper white panel | 600 × 300 px | 12 × 6 cm |
| Lower red panel | 600 × 300 px | 12 × 6 cm |
| Star outer diameter | 225 px | 4.5 cm |
| Star center (from upper left) | x=150, y=300 | x=3 cm, y=6 cm |
Place the white star in the center of the blue stripe, with one point up. The diameter refers to an imaginary circle through its five outer points, not the distance between neighboring tips. Keeping the proportions consistent ensures a small classroom image follows the same design as a full-size fabric flag.
How to draw the Texas state flag
- Draw a rectangle that is three units long for every two units high.
- Make a vertical guide at one-third of the width from the left. Fill that full-height segment dark blue.
- Divide the remaining two-thirds into equal upper and lower rectangles. Leave the upper rectangle white and fill the lower rectangle red.
- Find the exact center of the blue band. Mark a faint construction circle with diameter equal to 75% of the band’s width.
- Draw a regular white five-pointed star inside the circle. Point one tip upward, then erase construction marks.
Three common mistakes are making the blue stripe one-third of the height rather than the length; placing the red field above white; and using a five-point star that is too small or off-center. Use the official Texas State Library construction description before preparing formal artwork.
Texas flag vs. U.S. and Chile flags
The United States national flag has fifty stars and thirteen alternating stripes. Texas has one large star and just two horizontal fields to the right of a broad blue hoist band. Despite the similar colors, their arrangements convey different political histories.
Chile’s flag is another frequent comparison. It also shows one white star on blue above white and red, but its blue canton occupies the upper-left corner; the red lower band extends across the entire flag. On Texas’s flag, the blue band runs from top to bottom and the red band starts only after the blue band. The resemblance does not make them identical flags.
For the original history of the Texas design, see the Handbook of Texas historical overview, which distinguishes documented congressional action from uncertain attribution of earlier designs.
Texas state flag FAQs
When was the Texas Lone Star Flag adopted?
January 25, 1839, as the national flag of the independent Republic of Texas.
Who designed the Texas flag?
Peter Krag prepared the approved 1839 artwork, while the historical record does not conclusively establish who first invented the full design concept.
What does the lone star stand for?
Texas’s Lone Star identity, associated with its period as an independent republic and with state unity.
What is the official ratio of the Texas flag?
Two units high to three units long, or a 2:3 height-to-length ratio.
What color is on top of the horizontal stripes?
White is above red; both are to the right of the vertical blue stripe.
What do Texas’s colors represent?
Texas Government Code identifies red with bravery, white with purity and blue with loyalty.
Does the Texas state flag have one star or five?
It has one star, which itself has five points.
Texas and North Carolina are easily mistaken in small images because both use a white star on blue with red-and-white stripes. The side-by-side state flag comparison shows their different stripe order and inscriptions.
The star on Texas’s state flag is a different design from the one at the center of the Juneteenth flag, whose symbols commemorate the 1865 emancipation announcement in Galveston. Compare their meanings in our Juneteenth flag guide.
Texas Government Code, Chapter 3100
Texas State Library — Flag Description
Texas State Library — Peter Krag’s 1839 drawing
Handbook of Texas — History of Flags
Illustration: public-domain state flag artwork, Flagpedia/FlagCDN, locally hosted on FlagExplorers. Historical and legal facts verified against the cited state and archival resources.